|
CorvAIRCRAFT Free Classified Ads
Exchange of parts, supplies, instruments, etc. related
to the use of a Corvair engine in Experimental Aircraft
-
To submit an ad,
E-mail me the
exact text, INCLUDING PRICE.
(Ad's submitted with out a price will not be listed.)
-
Please do not attach any photos to your E-mail. If you have a photo,
let
me know, and I'll give you instructions on how to upload it to me.
-
Ads will run until you tell me to remove it, and will be listed from
newest to oldest.
|
From
Dave 4/9/2005
Wanted:
110 hp Corvair engine. I am looking
for a suitable engine for conversion, preferably 65 to 69 164cu. I live in
Alberta Canada so if I can find anything close.
|
|
From
Scott Bixler 3/15/2005
Wanted: rebuildable
110hp 65-69 no smog Corvair engine at a reasonable price in the North
Georgia, North Alabama, Chattanooga TN area. I am one of the rare cases
where the crank, rods, and heads were shot on the first motor I bought.
(Looks like a piece of metal or sand chewed up the inside of this motor in
addition to a really bad rebuild) Prefer a low mileage engine but will
take any that hasn't already been "rebuilt" or is seized. e-mail or call
256 638-4103 |
|
From Gary 3/14/05
For Sale: I have a 1967
Corvair Monza with a 110 hp
engine. It runs, and is still in the car. I will take $350 for it. You can
email me at
shaynacooper@otelco.net. or call me at 256-498-0655 in the evenings.
Morgan City, Alabama. |
| From
Tadeu
Passarelli 10/02/03
Wanted:
100 hp's heads needed. Greetings, fellow builders, someone please
sell
me a pair of usable 110 heads on condition (i.e. workable/usable). Mines
are 140's and I can't use them. I live and build in Brazil (Sao Paulo state) so think about S&H
when figuring out a price. Thank you. Tadeu Passarelli, pilot & KR builder.
|
|
From: Jon Crawford 3-30-00
For Sale:
Michael Engineering epoxy pump for sale. It is in excellent condition, with
new seals, springs, reservoirs, and base. Picture available at:
http://home.att.net/~jon.laurel/pump.jpg
$100 firm
Brand new VW engine mount for sale. It is the "new" design for the
Dragonfly, but may work on other firewalls as well. Please Email for
specific dimensions.
Picture available at
http://home.att.net/~jon.laurel/mount.jpg
$75 firm.
Prices do not including shipping.
|
|
From: Del Magsam 11-17-99
Wanted: for my Pietenpol project: Corvair engine mount, intake manifold tube for single carb, exhaust piping, or any
other misc. acc for a Corvair install.
|
|
From: Doug Peterson 11-01-99
Wanted: 110 hp Corvair engine.
I am looking for a suitable engine for conversion, preferably 65 to 69 164cu. Hoping
to find one within a 150 mile radius of Gainesville Florida though I do get to Atlanta
once in a while. Already ordered William Wynne's plans. I would prefer not to
separate a
potentially restorable car from its engine though, lets keep them on the road as well as
in the air.
Price? Willing to pay a fair price, depends on the engine and how much work it is to
retrieve.
E-mail me if you have one or know of one. Thank You.
|
|
|
|
|
If you have comments or suggestions, E-Mail me,
Patrick Panzera
|
